Six Sigma Yellow Belt Certification Training in pune

Watch demo Course

A two-day Six Sigma Yellow Belt Training program involving methods of problem solving through expert coaching. The training will comprise of practical approachability to the problem, class lectures, team exercises and understanding case studies. The completion of the course will provide you with increased productivity, improved quality, increased communication among peers, optimization of resources, reduced cost and customer satisfaction. A Six Sigma exam is held after completing the course. If the candidate clears the exam, you receive a Lean Six Sigma Yellow Belt Certification with a span of 7-10 working days.

3.8/5

(2800 Ratings)

14000

 

After the completion of the Program, the participants would be able to:

  • An introduction to Six Sigma Yellow Belt Certification Training
  • Problem Solving using basic tools
  • The DMAIC (Define, Measure, Analyze, Improve, Control) Methodology
  • Understanding Data using Basic Statistics, Calculations
  • Ideas Generation & Selection

The course will benefit delegates from businesses that are implementing Six Sigma Yellow Belt Certification and wish to widen the knowledge base of their workforce in terms of overview, expectations and capabilities.

There is no eligibility criteria to take up the the Six Sigma Yellow Belt certification. Any professional can undergo for training and certification exam. Some knowledge of Six Sigma is helpful, but not required.

 

Introduction - Six Sigma

  • What is Quality?
  • Evolution of Quality Function
  • What is Six Sigma Certification
  • SIX SIGMA –Principles & Key Themes
  • Terminologies in Six Sigma Certification Course
  • Quality Control v/s Quality Assurance
  • ISO v/s Six Sigma

Six Sigma Management Module

  • Voice of Customer (VOC)
  • Customer Needs (SN, UnN & D)
  • Poka Yoke (RCO & ICD)
  • Traditional Management v/s Modern Management
  • Defining QCS Goals (Quality , Cost, Schedule)
  • Cost of Quality (COQ)
  • Value Stream Process Mapping (RVA, BVA, NVA)

Six Sigma DMAIC Methodology Module

  • DMAIC Six Sigma Methodology for Six Sigma Projects
  • Define Phase
  • Measure Phase
  • Analyze Phase
  • Improve Phase
  • Control Phase

 

 

  • Professional Certified Experts with 20+ years of Industry and Training Experience
  • Organization accredited from UASL UK.
  • Official course material enabling ease to clear the Yellow Belt Six Sigma certification.
  • Collaborative sessions for the Lean Yellow Belt Certification Training.
  • PMI Global Registered Education Provider (R.E.P. No. 2739)
  • High Success rate of 97.6% clearing Six Sigma Yellow Belt Certification Course in 1st attempt.

 

 

  • Constructing a fundamental groundwork for revolutionary performance.
  • Enable you to create an authority, to take ownership of their areas and environment.
  • Understand Six Sigma Methodology including the DMAIC Process.
  • Identifying the crucial challenges and finding solution using Lean six sigma yellow Belt methodology.
  • Study skills and strategies to achieve incremental financial results.
  • Nurturing assistance to support the organization’s long range strategic goals.
  • Accumulating data to promote problem solving through this Lean Six Sigma Yellow Belt certification.
  • Learning the art to Master tools/techniques required to assist Green Belts and Black Belts in successful deployment of Lean Six Sigma Yellow Belt Training.

Mr. Nitin Shende ,PMP® PMI-PBA® Prince2® CSM® ITIL®F QPMP® SSGB®

Sr. Vice President and Head – Project Management Training & Consulting

Nitin Shende is an International Management Consultant, Facilitator and Trainer, Speaker, with specialization in Project , Program Management

  • Member of Subject Matter Expert (SME) Review team & “Final draft Reviewer & Contributor” team for PMBOK® Guide Fifth edition & Fourth edition published Worldwide
  • Final Draft Reviewer (Standard Portion) for Project Management Body of Knowledge (PMBOK® Guide) Sixth Edition
  • Final Draft Reviewer (Guide Portion) for Project Management Body of Knowledge (PMBOK® Guide) Sixth Edition
  • SME Reviewer” for Standard for Organizational Project Management (OPM Standard)
  • Member “Final draft Reviewer & Contributor” team for ( Program management ) PgMP Guide Third edition 2012

 

What is the Yellow Belt?

  • Originally, Yellow Belts were individuals that were trained while working on a project with a Green or Black Belt. However, many companies require formal training for Yellow Belts. In most cases, Yellow Belt has some expertise in the process that is being improved, so he or she needs a basic understanding of Six Sigma in order to support the Green Belt or Black Belt working to improve the process. Yellow Belts do not have the knowledge needed to complete projects.

What is the Eligibility Criteria / Pre-requisites for the Six Sigma Yellow Belt Exam?

  • There are no eligibility criteria to take up the Six Sigma Yellow Belt certification. Any professional can undergo training and certification exam. Some knowledge of Six Sigma is helpful, but not required.

Where can I complete the formal Six Sigma Yellow Belt education in order to undertake the certification exam?

  • You can join Vinsys 'Six Sigma Yellow Belt Training and Certification Program' course at any of the open house session conducted across. If you are looking out to conduct this training in-house (within your office premises), we can facilitate for said service. You may reach us out at enquiry@vinsys.com, we shall revert back to you within 24 hours.

What is the duration of training?

  • Our Yellow belt is 2 days program and duration is 21 hours

When are the classes conducted?

  • All open house sessions are conducted on weekends only. For in-house sessions, it can be as per the customer requested schedule.

What all is included in the course?

  • Along with facilitating training sessions, we provide required course material and practice questions for exam preparation.

Who conduct the training sessions?

  • Training sessions are facilitated by certified experts having practical working experience as well as training experience. Our facilitators have 18+ to 30+ yrs of overall experience.

What are the qualifications of your instructors?

  • Our instructors are all Master Black Belts and have at least 14+ years of real-world experience working as a Master Black Belt for organizations across, Training delivery and coaching experience on Six Sigma.

Why one should join Vinsys?

  • UASL, UK Accredited Organization
  • Experiential Education
  • Experienced Industry Experts
  • Accredited course material
  • Quality Courseware
  • Post training support

Where can one give the Six Sigma Yellow Belt examination?

  • Certification Exam (Paper-based exam) is conducted immediately after completion of training i.e. on the last day of training.
  • The only method to earn an IASSC certification is to successfully sit for and pass an official IASSC certification™ exam. We do provide access to IASSC Certification exams at an additional cost.

Examination and Certification

  • Exam: 50 Q (All Objective type questions)
  • Exam Duration: 60 Minutes
  • Exam Score: Participants need to score at least 50% marks to pass the exam

Do you offer PDU’s?

  • Yes, we are an approved Global REP for PMI to offer PDU. You shall earn 14 PDUs after successful completion of this course.

 

After the completion of the Program, the participants would be able to:

  • An introduction to Six Sigma Yellow Belt Certification Training
  • Problem Solving using basic tools
  • The DMAIC (Define, Measure, Analyze, Improve, Control) Methodology
  • Understanding Data using Basic Statistics, Calculations
  • Ideas Generation & Selection

The course will benefit delegates from businesses that are implementing Six Sigma Yellow Belt Certification and wish to widen the knowledge base of their workforce in terms of overview, expectations and capabilities.

There is no eligibility criteria to take up the the Six Sigma Yellow Belt certification. Any professional can undergo for training and certification exam. Some knowledge of Six Sigma is helpful, but not required.

 

Introduction - Six Sigma

  • What is Quality?
  • Evolution of Quality Function
  • What is Six Sigma Certification
  • SIX SIGMA –Principles & Key Themes
  • Terminologies in Six Sigma Certification Course
  • Quality Control v/s Quality Assurance
  • ISO v/s Six Sigma

Six Sigma Management Module

  • Voice of Customer (VOC)
  • Customer Needs (SN, UnN & D)
  • Poka Yoke (RCO & ICD)
  • Traditional Management v/s Modern Management
  • Defining QCS Goals (Quality , Cost, Schedule)
  • Cost of Quality (COQ)
  • Value Stream Process Mapping (RVA, BVA, NVA)

Six Sigma DMAIC Methodology Module

  • DMAIC Six Sigma Methodology for Six Sigma Projects
  • Define Phase
  • Measure Phase
  • Analyze Phase
  • Improve Phase
  • Control Phase

 

 

  • Professional Certified Experts with 20+ years of Industry and Training Experience
  • Organization accredited from UASL UK.
  • Official course material enabling ease to clear the Yellow Belt Six Sigma certification.
  • Collaborative sessions for the Lean Yellow Belt Certification Training.
  • PMI Global Registered Education Provider (R.E.P. No. 2739)
  • High Success rate of 97.6% clearing Six Sigma Yellow Belt Certification Course in 1st attempt.

 

 

  • Constructing a fundamental groundwork for revolutionary performance.
  • Enable you to create an authority, to take ownership of their areas and environment.
  • Understand Six Sigma Methodology including the DMAIC Process.
  • Identifying the crucial challenges and finding solution using Lean six sigma yellow Belt methodology.
  • Study skills and strategies to achieve incremental financial results.
  • Nurturing assistance to support the organization’s long range strategic goals.
  • Accumulating data to promote problem solving through this Lean Six Sigma Yellow Belt certification.
  • Learning the art to Master tools/techniques required to assist Green Belts and Black Belts in successful deployment of Lean Six Sigma Yellow Belt Training.

Mr. Nitin Shende ,PMP® PMI-PBA® Prince2® CSM® ITIL®F QPMP® SSGB®

Sr. Vice President and Head – Project Management Training & Consulting

Nitin Shende is an International Management Consultant, Facilitator and Trainer, Speaker, with specialization in Project , Program Management

  • Member of Subject Matter Expert (SME) Review team & “Final draft Reviewer & Contributor” team for PMBOK® Guide Fifth edition & Fourth edition published Worldwide
  • Final Draft Reviewer (Standard Portion) for Project Management Body of Knowledge (PMBOK® Guide) Sixth Edition
  • Final Draft Reviewer (Guide Portion) for Project Management Body of Knowledge (PMBOK® Guide) Sixth Edition
  • SME Reviewer” for Standard for Organizational Project Management (OPM Standard)
  • Member “Final draft Reviewer & Contributor” team for ( Program management ) PgMP Guide Third edition 2012

 

What is the Yellow Belt?

  • Originally, Yellow Belts were individuals that were trained while working on a project with a Green or Black Belt. However, many companies require formal training for Yellow Belts. In most cases, Yellow Belt has some expertise in the process that is being improved, so he or she needs a basic understanding of Six Sigma in order to support the Green Belt or Black Belt working to improve the process. Yellow Belts do not have the knowledge needed to complete projects.

What is the Eligibility Criteria / Pre-requisites for the Six Sigma Yellow Belt Exam?

  • There are no eligibility criteria to take up the Six Sigma Yellow Belt certification. Any professional can undergo training and certification exam. Some knowledge of Six Sigma is helpful, but not required.

Where can I complete the formal Six Sigma Yellow Belt education in order to undertake the certification exam?

  • You can join Vinsys 'Six Sigma Yellow Belt Training and Certification Program' course at any of the open house session conducted across. If you are looking out to conduct this training in-house (within your office premises), we can facilitate for said service. You may reach us out at enquiry@vinsys.com, we shall revert back to you within 24 hours.

What is the duration of training?

  • Our Yellow belt is 2 days program and duration is 21 hours

When are the classes conducted?

  • All open house sessions are conducted on weekends only. For in-house sessions, it can be as per the customer requested schedule.

What all is included in the course?

  • Along with facilitating training sessions, we provide required course material and practice questions for exam preparation.

Who conduct the training sessions?

  • Training sessions are facilitated by certified experts having practical working experience as well as training experience. Our facilitators have 18+ to 30+ yrs of overall experience.

What are the qualifications of your instructors?

  • Our instructors are all Master Black Belts and have at least 14+ years of real-world experience working as a Master Black Belt for organizations across, Training delivery and coaching experience on Six Sigma.

Why one should join Vinsys?

  • UASL, UK Accredited Organization
  • Experiential Education
  • Experienced Industry Experts
  • Accredited course material
  • Quality Courseware
  • Post training support

Where can one give the Six Sigma Yellow Belt examination?

  • Certification Exam (Paper-based exam) is conducted immediately after completion of training i.e. on the last day of training.
  • The only method to earn an IASSC certification is to successfully sit for and pass an official IASSC certification™ exam. We do provide access to IASSC Certification exams at an additional cost.

Examination and Certification

  • Exam: 50 Q (All Objective type questions)
  • Exam Duration: 60 Minutes
  • Exam Score: Participants need to score at least 50% marks to pass the exam

Do you offer PDU’s?

  • Yes, we are an approved Global REP for PMI to offer PDU. You shall earn 14 PDUs after successful completion of this course.
Request More Information
images/six-sigma-yellow-belt-certification.png
Corporate training for Business
  • Blended Learning Delivery Model (Self-Paced E-Learning And/Or Instructor-Led Options)
  • Course, Category, And All-Access Pricing
  • Enterprise-Class Learning Management System (LMS)
  • Enhanced Reporting For Individuals And Teams
  • 24x7 Teaching Assistance And Support

Reviews

reviewer.png

Azeez Tunbosun

Manager


reviewer.png

Mr.Priyank Agarwal

Manager

This was my third corporate training program from Vinsys and every time the experience keeps getting better. I have completed two successful certification programs already, and a lot of the credit goes to the clarity brought about by the relevant subject matter experts (from Vinsys) who trained us. This training module was pure value for money as more than the theory aspect, it required explanation from the application of this knowledge in the corporate world – and the trainer was able to do that with ease. Also, I liked the way all key concepts were covered as part of this training program, in such a short span of time – without making us feel overloaded with information.


Find this Course at other locations:
Undergo Six Sigma Yellow Belt Certification Training in Pune and give your career a boost. This Lean Six Sigma Yellow Belt Course in Pune is helpful for everyone who wishes to climb up the corporate ladder. Pune is a city that is more of a hub for IT professionals in India, with some of the biggest IT corporates and companies having their offices in this city. After Mumbai, Pune is the most popular city in Maharashtra and also the second largest one in that state. Plenty of professionals migrate to Pune (even from cities like Mumbai) to have a glorious career in IT and / or project management. With a wide plethora of IT job and learning opportunities in Pune, Vinsys aids you with it's classroom training platforms. Every training program offered by Vinsys involves highly qualified subject matter expert as trainer, who makes sure all the participants gain in-depth knowledge of the subject as well as get complete understanding from an industry perspective with the help of different case studies. The learnings obtained from specific Vinsys training programs enable participants to appear for relevant certification exams with full confidence and achieve success. At Vinsys, you gain access to hundreds of training / learning programs - be it IT training programs, project management certification training courses, ITIL training offerings, Prince2 training programs, and many more. Clearly, learning never stops with Vinsys! So, if you are looking for corporate training companies / opportunities in Pune, look no further than Vinsys.

+91-20-67444700

Australia | China | Kenya | India | Malaysia | Oman | Singapore | Tanzania | UAE | USA |

enquiry@vinsys.com