Designing Cisco Enterprise Networks (ENSLD) v1.0

Watch demo Course

This course helps you prepare to take the 300-420 Designing Cisco Enterprise Networks (ENSLD) exam which is part of the CCNP® Enterprise and Cisco Certified Specialist - Enterprise Design certifications.

5.0/5

(3000 Ratings)

4000

The Designing Cisco Enterprise Networks (ENSLD) v1.0 course gives you the knowledge and skills you need to design an enterprise network. This course serves as a deep dive into enterprise network design and expands on the topics covered in the Implementing and Operating Cisco® Enterprise Network Core Technologies (ENCOR)

v1.0 course.

This course also helps you prepare to take the 300-420 Designing Cisco Enterprise Networks (ENSLD) exam which is part of the CCNP® Enterprise and Cisco Certified Specialist - Enterprise Design certifications.

Objectives

After taking this course, you should be able to:

Design Enhanced Interior Gateway Routing Protocol (EIGRP) internal routing for the enterprise network
Design Open Shortest Path First (OSPF) internal routing for the enterprise network
Design Intermediate System to Intermediate System (IS-IS) internal routing for the enterprise network
Design a network based on customer requirements
Design Border Gateway Protocol (BGP) routing for the enterprise network
Describe the different types and uses of Multiprotocol BGP (MP-BGP) address families
Describe BGP load sharing
Design a BGP network based on customer requirements
Decide where the L2/L3 boundary will be in your Campus network and make design decisions
Describe Layer 2 design considerations for Enterprise Campus networks
Design a LAN network based on customer requirements
Describe Layer 3 design considerations in an Enterprise Campus network
Examine Cisco SD-Access fundamental concepts
Describe Cisco SD-Access Fabric Design
Design an Software-Defined Access (SD-Access) Campus Fabric based on customer requirements
Design service provider-managed VPNs
Design enterprise-managed VPNs
Design a resilient WAN
Design a resilient WAN network based on customer requirements
Examine the Cisco SD-WAN architecture
Describe Cisco SD-WAN deployment options
Design Cisco SD-WAN redundancy
Explain the basic principles of QoS
Design Quality of Service (QoS) for the WAN
Design QoS for enterprise network based on customer requirements

Explain the basic principles of multicast
Designing rendezvous point distribution solutions
Describe high-level considerations when doing IP addressing design
Create an IPv6 addressing plan
Plan an IPv6 deployment in an existing enterprise IPv4 network
Describe the challenges that you might encounter when transitioning to IPv6
Design an IPv6 addressing plan based on customer requirements
Describe Network APIs and protocols
Describe Yet Another Next Generation (YANG), Network Configuration Protocol (NETCONF), and Representational State Transfer Configuration Protocol (RESTCONF)

Outline

Designing EIGRP Routing
Designing OSPF Routing
Designing IS-IS Routing
Designing BGP Routing and Redundancy
Understanding BGP Address Families
Designing the Enterprise Campus LAN
Designing the Layer 2 Campus
Designing the Layer 3 Campus
Discovering the Cisco SD-Access Architecture
Exploring Cisco SD-Access Fabric Design
Designing Service Provider-Managed VPNs
Designing Enterprise-Managed VPNs
Designing WAN Resiliency
Examining Cisco SD-WAN Architectures
Cisco SD-WAN Deployment Design Considerations
Designing Cisco SD-WAN Routing and High Availability
Understanding QoS
Designing LAN and WAN QoS
Exploring Multicast with Protocol-Independent Multicast-Sparse Mode
Designing Rendezvous Point Distribution Solutions
Designing an IPv4 Address Plan

- Exploring IPv6
- Deploying IPv6
- Introducing Network APIs and Protocols
- Exploring YANG, NETCONF, RESTCONF, and Model-Driven Telemetry

Lab outline

- Designing Enterprise Connectivity
- Designing an Enterprise Network with BGP Internet Connectivity
- Designing an Enterprise Campus LAN
- Designing Resilient Enterprise WAN
- Designing QoS in an Enterprise Network
- Designing an Enterprise IPv6 Network

The 300-420 ENSLD exam certifies your knowledge of enterprise design including advanced addressing and routing solutions, advanced enterprise campus networks, WAN, security services, network services, and SDA. The exam will be available beginning February 24, 2020.

After you pass the 300-420 ENSLD exam:

You earn the Cisco Certified Specialist - Enterprise Design certification
You will have satisfied the concentration exam requirement for the new CCNP Enterprise certification. To complete your CCNP Enterprise certification, you must pass the 350-401 Implementing Cisco Enterprise Network Core Technologies (ENCOR) exam or its equivalent

Network design engineers
Network engineers
System administrators

Instructor-led training: 5 days in the classroom with hands-on lab practice
Virtual instructor-led training: 5 days of web-based instruction with hands-on lab practice

Before taking this course, you should have earned CCNA® certification or be familiar with:

Basic network fundamentals and building simple LANs
Basic IP addressing and subnets
Routing and switching fundamentals
Basic wireless networking concepts and terminology

This course will help you:

Learn the skills, technologies, and best practices needed to design an enterprise network
Deepen your understanding of enterprise design including advanced addressing and routing solutions, advanced enterprise campus networks, WAN, security services, network services, and software-defined access SDA
Validate your knowledge and prepare to take the 300-420 Designing Cisco Enterprise Networks

(ENSLD) exam

What Will You Learn?

v1.0 course.

Course Objectives

Objectives

After taking this course, you should be able to:

Design Enhanced Interior Gateway Routing Protocol (EIGRP) internal routing for the enterprise network
Design Open Shortest Path First (OSPF) internal routing for the enterprise network
Design Intermediate System to Intermediate System (IS-IS) internal routing for the enterprise network
Design a network based on customer requirements
Design Border Gateway Protocol (BGP) routing for the enterprise network
Describe the different types and uses of Multiprotocol BGP (MP-BGP) address families
Describe BGP load sharing
Design a BGP network based on customer requirements
Decide where the L2/L3 boundary will be in your Campus network and make design decisions
Describe Layer 2 design considerations for Enterprise Campus networks
Design a LAN network based on customer requirements
Describe Layer 3 design considerations in an Enterprise Campus network
Examine Cisco SD-Access fundamental concepts
Describe Cisco SD-Access Fabric Design
Design an Software-Defined Access (SD-Access) Campus Fabric based on customer requirements
Design service provider-managed VPNs
Design enterprise-managed VPNs
Design a resilient WAN
Design a resilient WAN network based on customer requirements
Examine the Cisco SD-WAN architecture
Describe Cisco SD-WAN deployment options
Design Cisco SD-WAN redundancy
Explain the basic principles of QoS
Design Quality of Service (QoS) for the WAN
Design QoS for enterprise network based on customer requirements

Explain the basic principles of multicast
Designing rendezvous point distribution solutions
Describe high-level considerations when doing IP addressing design
Create an IPv6 addressing plan
Plan an IPv6 deployment in an existing enterprise IPv4 network
Describe the challenges that you might encounter when transitioning to IPv6
Design an IPv6 addressing plan based on customer requirements
Describe Network APIs and protocols
Describe Yet Another Next Generation (YANG), Network Configuration Protocol (NETCONF), and Representational State Transfer Configuration Protocol (RESTCONF)

Course Outline

Outline

Designing EIGRP Routing
Designing OSPF Routing
Designing IS-IS Routing
Designing BGP Routing and Redundancy
Understanding BGP Address Families
Designing the Enterprise Campus LAN
Designing the Layer 2 Campus
Designing the Layer 3 Campus
Discovering the Cisco SD-Access Architecture
Exploring Cisco SD-Access Fabric Design
Designing Service Provider-Managed VPNs
Designing Enterprise-Managed VPNs
Designing WAN Resiliency
Examining Cisco SD-WAN Architectures
Cisco SD-WAN Deployment Design Considerations
Designing Cisco SD-WAN Routing and High Availability
Understanding QoS
Designing LAN and WAN QoS
Exploring Multicast with Protocol-Independent Multicast-Sparse Mode
Designing Rendezvous Point Distribution Solutions
Designing an IPv4 Address Plan

- Exploring IPv6
- Deploying IPv6
- Introducing Network APIs and Protocols
- Exploring YANG, NETCONF, RESTCONF, and Model-Driven Telemetry

Lab outline

- Designing Enterprise Connectivity
- Designing an Enterprise Network with BGP Internet Connectivity
- Designing an Enterprise Campus LAN
- Designing Resilient Enterprise WAN
- Designing QoS in an Enterprise Network
- Designing an Enterprise IPv6 Network

About the Examination

After you pass the 300-420 ENSLD exam:

You earn the Cisco Certified Specialist - Enterprise Design certification
You will have satisfied the concentration exam requirement for the new CCNP Enterprise certification. To complete your CCNP Enterprise certification, you must pass the 350-401 Implementing Cisco Enterprise Network Core Technologies (ENCOR) exam or its equivalent

Who Should Attend?

Network design engineers
Network engineers
System administrators

Course Description

Instructor-led training: 5 days in the classroom with hands-on lab practice
Virtual instructor-led training: 5 days of web-based instruction with hands-on lab practice

Prerequisites

Before taking this course, you should have earned CCNA® certification or be familiar with:

Basic network fundamentals and building simple LANs
Basic IP addressing and subnets
Routing and switching fundamentals
Basic wireless networking concepts and terminology

Course Benefits

This course will help you:

Learn the skills, technologies, and best practices needed to design an enterprise network
Deepen your understanding of enterprise design including advanced addressing and routing solutions, advanced enterprise campus networks, WAN, security services, network services, and software-defined access SDA
Validate your knowledge and prepare to take the 300-420 Designing Cisco Enterprise Networks

(ENSLD) exam

Request More Information

Individuals
Business

Enquire for your Suitable Dates

Reviews

Abhishek Sen

Network Associate

This training was worth attending. I would recommend Vinsys for CISCO courses.

Like to Learn Related Courses

Find this Course at other locations:

Disclaimer

COBIT® 5 is a registered trademark of ISACA in United States and other countries. DevOps Foundation®, Certified Agile Service Manager (CASM)®, Certified Agile Process Owner (CAPO)® & Agile Service Management® are registered marks of the DevOps Institute.

PMBOK®, Project Management Institute® PMI®, Certified Associate in Project Management (CAPM)®, Project Management Professional (PMP)®, Program Management Professional (PgMP)®, Portfolio Management Professional (PfMP)®, PMI Agile Certified Practitioner (PMI-ACP)®, PMI Professional in Business Analysis (PMI-PBA)®, PMI Risk Management Professional (PMI-RMP)®, PMI Scheduling Professional (PMI-SP)® are the Registered Marks of the Project Management Institute, Inc.

TOGAF® is a registered trademark of The Open Group